Engineers at an oil and gas facility

SCADA & Remote Monitoring

From manual checks to 24/7 automated monitoring of wellheads, pipelines and rigs, with no power grid or cellular coverage required.

Home/ Solutions/ SCADA Monitoring
ZONE_0
01

ATEX & IP66

Certified for safe, continuous operation in explosive and hazardous zones.

PWR_SUN
02

100% Solar

Autonomous off-grid operation with a 3-day battery backup.

TMP_RES
03

-20 to +50 °C

Hardware built to run uninterrupted through extreme heat and cold.

RNG_5KM
04

5 km LoRaWAN

Low-power mesh networks for site-wide visibility without per-asset satellite costs.

Remote operations control room
Fig 01

Know the state of every asset, all the time

Remote wellheads, pipelines and offshore platforms have traditionally been checked by sending people to look at them. TheAngle replaces those manual rounds with automated monitoring that reports continuously over satellite.

Using high-speed VSAT on Ka and Ku band, our systems provide real-time monitoring of flow, pressure and valve position, and detect leaks as they happen. They run on solar power and their own communications, entirely independent of the national grid and cellular coverage.

Scope of delivery

What we deliver

01 //

SCADA over satellite

Flow, pressure and valve data delivered from the field to your control room.

02 //

Leak and anomaly detection

Sensors that detect leaks, pressure drops and operational anomalies automatically.

03 //

Edge intelligence

Telemetry processed locally, so data is sent only when an issue is verified.

04 //

ATEX-certified housings

Custom enclosures that let equipment be deployed directly in hazardous zones.

05 //

LoRaWAN mesh

Low-power networks with a 5 km range that link many sensors to one satellite uplink.

06 //

Solar power systems

Off-grid power with battery backup, sized for unattended operation.

Deployment

Where it is used

Automated monitoring reduces the need for people in high-risk zones and gives operators one continuous picture of their assets.

  • Remote desert wellheads
  • Off-grid pipeline networks
  • Offshore rigs and platforms
  • Sites in ATEX-classified hazardous areas
Briefing

Questions & answers

Q.01

What does remote SCADA monitoring replace?

It replaces manual site checks with 24/7 automated monitoring. Sensors report flow, pressure and valve position continuously and raise an alert when a leak or anomaly is detected.

Q.02

Does it need mains power or mobile coverage?

No. The systems are solar powered with a 3-day battery backup and communicate over satellite, so they work without a power grid or cellular coverage.

Q.03

Can the equipment be installed in hazardous areas?

Yes. TheAngle systems are ATEX and IP66 certified, and custom ATEX-certified housings allow them to be deployed in explosive and hazardous zones.

Q.04

What temperatures can the hardware withstand?

The hardware is built to operate uninterrupted from -20 °C to +50 °C.

Q.05

How do many sensors share one satellite link?

Sensors connect over a low-power LoRaWAN mesh network with a range of about 5 km. The mesh feeds a single VSAT uplink, which avoids the cost of a satellite terminal for every asset.